This product is a high-tech monitor and controller which incorporates high definition color camera, universal variable pan/tilt, infrared lighting, multi-functional decoder, character superimposing, alarm input/output into a whole, reduces interconnections to a great extent among parts in the system and rises up the reliability of the system. In addition it has advantages of easy installation and maintenance, beautiful appearance, lightweight and flexible, simple operation etc.

Integrated Multi-Protocol Decoder
a. The built-in decoder integrates 16 kinds of communication protocols in maximum. The baud rate of communication is adjustable. It has strong universality and is compatible with multiple common systems only by simple setting on the dip-switch.
b. RS485 serial control: addresses of the pan/tilt 1 – 1023.
2. Integrated Panoramic Pan/Tilt
a. To rotate continuously in unlimited 360ºhorizontally with speed from 0.9 – 60 rad/s and from - 90º－90º vertically with manual speed of 40 rad/s.
b. Smooth running at low speed with super lower noise. Images have no fluttering.
c. Panoramic monitor without black spot and the positioning accuracy can reach ±0.1°.
3. High Degree of Intelligence
a. Preset memory has as much as 128 positions. Data are kept in memory even power is failure.
b. Horizontal scan between two positions are supported. Scan speed can be altered and direction of pan can be selected freely. The pan/tilt can make scan larger or smaller than 180° between any two positions with adjustable speed.
c. Six groups of programmable patrol pattern are available with 16 preset positions each. The running speed and retained time for each preset position are adjustable respectively.
d. Self-study function of pattern. The system can simulate the PTZ route of user’s operation within 40 １
seconds and data are kept in memory even power is failure.
e. Character superimposing function. It can display the address of the pan/tilt, title of the preset position etc.
f. Long focus speed-limited function. The pan/tilt can adjust automatically the manual control speed depending on the focal length of the camera. The larger the magnification times, the slower the manual control speed thus to ensure searching the target rapidly and accurately.
g. Integrated multiple protocols. A lot of communication protocols are integrated inside the pan/tilt with selectable baud rates from 2400 bps to 19200 bps.
4. Camera Function: Refer to Camera
a. Control Mode of Focal Length： the user can manually adjust the focal length of the camera.
b. Control of Magnification：the user can “pull up” or “push away” the lens
c. Backlight Compensation： in case the lit object has dark background and couldn’t be displayed clearly, the user can switch on the backlight compensation .
d. White Balance： in case images have distorted color on the screen, the user can set various kinds of modes by orders. There are six modes available for selection: ① indoor modemm ② outdoor mode ③ trigger mode ④ auto tracking white balance ⑤ manual white balance ⑥ automatic mode.
e. AE Mode：manual/automatic setup.
f. Setup of Low Illumination： normally the camera operates under normal condition. In case when ambient illumination is lower than 1 LUX, the camera can automatically switch into zero illumination state . You can also make the camera under the zero illumination state manually.
g. Other function: refer to different camera by using system menu to control.
5. Alarm Input/Output (only when used as normal pan/tilt, AC24V input)
a. Four normal-open alarm inputs and close alarm.
b. One group of the alarm output: normal-open and normal-close style.
c. When the system identifies the alarm signal, it can start the pan/tilt and the camera immediately as per the setup of the program, and switch the image in the alarm zone into the main monitor, adjust the position of the alarm position, monitor the preset position and reflect conditions of the alarm zone as fast as it can.