Powerful Zoom Camera & Setup Options

Image Sensor : 1/4" Supuer HAD color CCD

Zoom : x27 Optical Zoom, x12 Digital Zoom

Day & Night, Privacy Mask and HLC

SNR (Super Noise Reduction) Function

Various Focus Mode : Auto-Focus, Manual Focus, Semi-Auto Focus

Various Setup Options in OSD Menu.

Powerful Pan / Tilt Functions

MAX. 360°/sec High Speed Pan / Tilt Motion

With the Vector Drive Technology, Pan / Tilt motions are accomplished along the shortest path. As a result, the time to target view is remarkably short and the video on the monitor is very natural in monitoring.

With the Micro-Stepping Control Technology, the video looks very natural at high zoom magnification during a jog operation on a controller since the camera can be controlled by 0.05°/sec. Hence it is very easy to make the camera focus on desired target views at high zoom magnification. Additionally it is easy to make the camera focus on desired positions with zoom-proportional pan/tilt movement.

Preset, Pattern, Swing, Group, Privacy Mask and More...

MAX. 128 Presets are programmable and each preset can have its own parameter values independently from the other presets.

MAX. 8 sets of Swing are programmable. This function is that the camera moves repetitively between two preset positions at programmed speeds.

MAX. 4 Patterns are programmable, This function is that the camera memorizes the path (mostly curve path) by the joystick of the controller and revives the trajectory operated by the joystick as closely as possible.

MAX. 8 sets of Group are programmable. This function is that the camera memorizes the combination of Presets, Pattern and/or Swings sequently snd runs Presets, Pattern and/or Swings repetitively. A Group can be combined upto 20 functions with any of Preset/Pattern/Swing.

MAX. 8 Privacy Masks are programmable, not to intrude on any other's privacy.

PTZ (Pan/Tilt/Zoom) Control

With the RS-485 communication connection, MAX. 255 units of cameras can be connected to a single controller.

Pelco-D or Pelco-P protocols can be selected as a control protocol in the current firmware version.

OSD (On Screen Display) Control

OSD menu is provided to display the status of camera and to configure the functions interactively.

The information such as Camera ID, Pan/Tilt Angle, Direction, Alarm Input and Preset is displayed on screen.

Alarm In/Out Function (Only for the models which have I/O function)

3 alarm sensor inputs and 1 alarm sensor outputs are available.

Alarm sensor input is decoupled with photo-couplers to avoid external electric noise and shock perfectly.

Both of N.O. (Normal Open) sensors and N.C. (Normal Close) sensors can be used and the signal range of the sensor input is from DC 5.0V to 12.0V for various applications.

The camera can be set to move to a Preset position or to run functions such as Pattern, Swing and Group when there are extrnal sensor activations. Also "Post Alarm" function is possible, which is supposed to activate after user-defined time period and sequentially in succession to the action by external sensor activations.

Reserved Presets (Hot Keys)

Most camera setup options can be set up easily and directly with the reserved presets (Hot Keys), without entering into OSD menu. For more information, refer to "Reserved Presets (Hot Keys)" in this manual.

Perfect Outdoor Environment Compatibility and Easy Installation

The fans and heaters are built-in in the camera for cold and hot temperature environment. Also idealistic mechanical design protects the camera from water and dust. (IP66 when installed properly with wall mount bracket only / Only for outdoor models)

It is easy to install and repair the camera.

Video Signal Format	NTSC / PAL
Image Sensor	1/4" Super HAD color CCD
Total Pixels	NTSC : 811(H) x 508(V) 410K PAL : 795(H) x 596(V) 470K
Effective Pixels	NTSC : 768(H) x 494(V) 380K PAL : 752(H) x 582(V) 440K
Horizontal Resolution	550 TV Lines (Color), 680 TV Lines (B/W)
Video Signal-to-Noise	50 dB (AGC Off)
Zoom	x27 Optical Zoom, x12 Digital Zoom
Forcal Length	F1.6 ~2.9, f=3.5 ~94.5mm
Angle of View	H : 55.5°(Wide) ~ 2.24°(Tele) / V : 42.5°(Wide) ~ 1.79°(Tele)
Zoom Speed	1.8 sec (Wide to Tele)
Minimum Illuminance	0.4 Lux (Color) / 0.02 Lux (B/W), 50 IRE / F1.6
Day & Night	Auto / Day / Night (ICR)
Focus	Auto / Manual / Semi-Auto
Iris	Auto / Manual
Shutter Speed	x256 ~ 1/120,000 sec
AGC	Low / Middle / High / Manual / Off
White Balance	Auto / Manual (Red, Blue Gain Adjustable. 1800°K ~ 10500°K)
BLC	BLC / HLC / Off
Flicerless	Selectable
SSNR	Low / Middle / High / Off
Privacy Zone	8 Masks, Spherical Coordinate
Stabilization	ON / OFF
Movement Range	Pan : 360° (Endless) Tilt : 90°
Speed	Preset : 360° / sec Jog : 0.05 ~ 360° / sec. (Proportional to Zoom) Swing : 1 ~ 180° / sec
Preset	127 Presets (Label, Independent Camera Parameter Setting)
Pattern	4 Patterns [1200 Commands (Approx. 5 Minute) / Pattern]
Swing	8 Swings
Group	8 Groups (MAX. 20 Actions with The Combination of Preset, Pattern and Swing)
Other Pan/Tilt Function	Auto Flip, Auto Parking, Power Up Action and etc.
Communication	RS-485
Protocol	Pelco-D, Pelco-P Selectable
OSD	English, Menu / PTZ Information etc.
Sensor Input	3 Inputs, Photo-Coupler Type, DC 5V ~ 12V
Alarm Outputs	1 Output, Relay Output, MAX. Load DC24V 1A / AC 125V 0.5A
Fan	Always ON
Heater	Operation Start from Internal Temperature 10°C
Operation Temperature	-30°C ~ 50°C / -22°F ~ 122°F
Power	AC 24V / 1.5A

No reviews available.

PTZ Manual

No recommended accessories available.